The plant is set up to take a drawing and return parts that fit. A fibre laser, CNC press brake and turret punch cover the cutting and forming; dedicated welding and finishing bays complete the job.
The figures below are the capacities we quote to and inspect to: sheet size, bend length, thickness and tolerance.
The machine line-up
- Fibre laser cutter. Clean, square edges in stainless, carbon steel and aluminium with minimal heat input. See fibre laser cutting.
- CNC press brake. Programmed bending with consistent angles across repeat parts. See CNC press brake.
- CNC turret punch. Punching, notching, forming and tapping in one set-up. See CNC turret punch.
- Welding and finishing bays. MIG and TIG welding, dressing, painting and polishing. See welding & finishing.
Materials and limits
| Mild steel | Cut to 20mm · folded to 10mm |
| Stainless steel 304/316 | Cut to 12mm · folded to 6mm |
| Aluminium | Cut to 8mm · folded to 6mm |
| Galvanised steel | Cut and folded · weld with localised coating repair |
| Sheet size | Up to 3000 × 1500mm on the laser |
| Bend length | Up to 3200mm on the press brake |
Outside these limits
If your part is outside these limits, tell us anyway. We regularly split assemblies into welded sections, or work with approved subcontractors for processes such as powder coating and galvanising.
How capability translates to your job
A 3000 × 1500 sheet does not help you if it is poorly nested. We nest parts to minimise waste, sequence cutting to protect fine edges, and program bends with the correct allowance for each material and thickness. The result is parts that arrive flat, square and ready to assemble.
Tolerances in practice
A tolerance matters only at the interfaces. We hold ±0.2mm on laser-cut profiles and ±0.5° on programmed bends as standard; these are the figures the machines hold in normal production. Where two parts bolt together, the holes carry the tolerance. The outer outline of a bracket rarely needs the same precision, and paying for it adds cost without adding function.
- Specify the interface: hole positions, mounting faces and mating edges.
- Allow standard tolerances elsewhere — the machines hold them anyway.
- Tell us what the part fits; we will flag dimensions that are impractical to hold.
Beyond the machine list
Capability is also the processes we manage around the machines: powder coating and galvanising through approved partners, machining coordination for tolerances tighter than ±0.2mm, and installation crews for work that must end up fixed to something. If the part you need is outside the published limits, ask.
A question we hear often
Can you make a part bigger than the sheet?
Yes — usually as a welded assembly. We split large parts into sections that fit the sheet and the jig, then weld them back together with distortion control. The drawing is adjusted so the finished part, not the flat pieces, is what gets inspected.
Check your part against our plant
Send a drawing and we will confirm material, process and lead time.
Common questions
Not on the laser. For thicker sections we redesign the part as a welded assembly or work with a partner process — we will tell you which is the better route and why before quoting.
Specify the interface: hole positions, mounting faces and mating edges at ±0.2mm or tighter where the fit requires. Leave the rest at standard tolerance.
Cutting and folding tolerances are held in-house. For tighter machined fits we coordinate with a machining partner and inspect the result — you still deal with one supplier.
Quick enquiry
Send the part and we will confirm material, process and lead time.