Finishing covers painting, polishing and linishing in the workshop. Powder coating and galvanising are managed through approved partners. Installation is carried out by the same crew that made the work.
The finish protects the part from weather and wear. The coating is matched to the environment and the use, and applied over correctly prepared metal.
What is included
- Painting — primed and top-coated for interior or exterior use
- Polishing & linishing — brushed and mirror finishes on stainless
- Powder coat coordination — prepared and dispatched to our coating partner
- On-site installation — set out, fixed and cleaned up
- Delivery across NSW — packed and labelled by drawing number
Specifications
| Painting | Primer + top coat · interior and exterior systems |
| Polishing | Brushed, satin and mirror on stainless |
| Powder coating | Via approved partner · quality checked on return |
| Installation | Own crew · access and fixings confirmed before fabrication |
Typical jobs
- Gates and balustrades
- Machine guards and covers
- Architectural stainless details
- Handrails and posts
- Site-installed frames and barriers
How we approach it
Finishing starts with preparation. Weld spatter is removed, edges are dressed, and surfaces are cleaned before any coating goes on. Painted work is checked for coverage and adhesion; polished work is checked under light for a consistent grain.
Quality checkpoint
The finish is inspected before packing, and parts are packed to prevent transport damage. If a painted surface is marked in transit, we repaint it before delivery.
Common question
Can you arrange powder coating?
Yes. We prepare the parts and send them to our approved coating partner, then check colour and coverage when they return. This keeps the whole job under our quality control.
Choosing a finish for the environment
The finish depends on where the part is used. Interior steel can take paint; exterior steel needs a system rated for weather; coastal steel needs stainless or a coating that will not fail at the first scratch. Matching the finish to the environment costs less over the life of the part than repainting.
- Interior: primer and top coat, or powder coat where appearance matters.
- Exterior: exterior-rated paint or powder coat, or galvanising for structural work.
- Coastal and food contact: 316 stainless, or a finish chosen with the environment in mind.
A question we hear often
Can you finish parts made by someone else?
Yes — painting, polishing and coating coordination are available on their own. Send photos and dimensions and we will quote the preparation and finish, including any repairs the parts need first.
Ready to start a job?
Send a drawing and we will come back with pricing and a lead time.
Common questions
That depends on the environment, which is why we ask first. Exterior-rated paint or powder coat over correctly prepared steel lasts years; interior finishes last longer. We specify the system for the exposure.
Yes — by RAL number or a physical sample. Powder coat colours are matched by the coating partner and confirmed before the run.
Yes. Site-installed work leaves with matching touch-up paint, and any transport marks are addressed before you accept the job.
Related projects

Stainless balustrade
A 316 balustrade for a coastal home, welded and linished with no visible joints.
Read the case study
Residential gate
A site-measured gate that follows a 120mm driveway fall and swings true.
Read the case studyQuick enquiry
Tell us what needs finishing or installing and we will call back the same business day.