Equipment skids are the steel bases that pumps, compressors, generators and plant sit on. They carry concentrated loads, often get lifted and forklifted, and must stay flat enough for rotating equipment to align properly.
A skid looks simple and is easy to get wrong. We build them on a flat jig, sequence the welding to control distortion, and machine or level the mounting pads after welding — because that is when the steel has already moved.
What the skid includes
- Pump & compressor bases — levelled mounting pads
- Generator skids — with lifting lugs and fork pockets
- Plant bases — frames to suit the equipment footprint
- Lifting lugs — sized and positioned for balanced lifts
- Levelling after welding — pads machined flat
Specifications
| Material | Structural mild steel |
| Welding | MIG · distortion-controlled sequence |
| Flatness | Mounting pads levelled after welding |
| Finish | Primer · paint · galvanising via partner |
Typical jobs
- Pump skids
- Compressor bases
- Generator frames
- Fan and motor bases
- Control panel stands
How we level it
Welding always moves steel. We weld the skid in a sequence that balances the distortion, then level the mounting pads last — so the finished surface is flat where the equipment actually sits.
Flatness checked
Skids are checked for flatness across the mounting pads after welding. If a pad is high, it is machined or ground.
Common question
How flat do the mounting pads need to be?
Tell us what sits on the skid and whether it is direct-coupled. We machine the pads to suit the equipment’s alignment requirement.
What to measure for us
- The equipment footprint and bolt pattern
- Total weight and how the skid will be lifted
- Mounting pad flatness required by the equipment
- Fork pockets or lifting lugs required
Related work
Worth knowing
Do the pads need to be machined?
We level the mounting pads after welding. If the equipment is direct-coupled or alignment-critical, we machine the pads to suit — tell us the requirement when you enquire.
Ready to start a job?
Send a drawing and we will come back with pricing and a lead time.