Sheet Metal
& Steel Fabrication

Services

Turret Punching

Home/Services

Turret punching drives a shaped tool through sheet metal to produce holes, louvres, embosses and forms in rapid succession. For hole-intensive work — grilles, ventilation panels, perforated patterns — it is often faster and more economical than cutting every hole with a laser.

The turret press does more than punch holes. It can form louvres, knock-outs, countersinks and small flanges in the same set-up, reducing the number of operations a part needs and the handling that goes with them.

What you get from the punch

  • Hole patterns — grilles and ventilation panels
  • Louvres & forms — pressed features without secondary ops
  • Countersinking — for flush fasteners
  • Tapping — M3 to M10 in the same set-up
  • Notching — corner and edge cut-outs

Specifications

Sheet sizeUp to 2500 × 1250mm
MaterialMild steel · stainless · aluminium to 6mm
ToolingStandard turret + custom forms
TappingM3 – M10
Tolerance±0.2mm on hole positions

Typical jobs

  • Ventilation grilles
  • Perforated guards
  • Brackets with tapped holes
  • Louved panels
  • Batch hole patterns

Our approach on the floor

We match the tool to the material and thickness, set the correct punch-to-die clearance, and stage the program so forms do not distort adjacent holes. Tapping in the same set-up saves a second handling.

Inspection point

Hole positions and tapped threads are checked with a gauge. A punched hole is a finished feature.

Common question

Laser or turret punch — which should I choose?

For mixed geometry with holes, the laser is usually best. For many identical holes, louvres or tapped holes, the turret punch is faster and cheaper. Tell us the part and we will choose the most economical process.

Information to include

  • The hole pattern, sizes and centres
  • Material and thickness — punching is most economical to 6mm
  • Whether threads are required (M3–M10)
  • Louvre or form details if the panel is for ventilation

You may also need

Worth knowing

Will punching leave marks on the sheet?

Punching can leave light tool marks on the surface, which is normal for the process. If the face is cosmetic, tell us and we will protect it or route the job to the laser.

Ready to start a job?

Send a drawing and we will come back with pricing and a lead time.

Request a Quote