Sheet Metal
& Steel Fabrication

Capabilities

Fibre Laser Cutting

Home/Capabilities

The fibre laser is the main cutting machine in the workshop. It cuts mild steel to 20mm, stainless to 12mm and aluminium to 8mm, on sheets up to 3000 × 1500mm, with a clean edge and minimal heat input.

For the customer, the laser means two things: complex profiles are cut in one pass without extra set-up, and repeat runs are repeatable. The same program cuts the same shape every time, which is why laser-cut parts assemble without grinding.

What the laser covers

  • Profile cutting — brackets, plates and flanges
  • Holes and slots — cut in the same pass
  • Fine features — small radii and close spacing
  • Nested batches — efficient sheet utilisation
  • Part marking — numbers and fold lines engraved

Specifications

Sheet sizeUp to 3000 × 1500mm
Mild steelTo 20mm
StainlessTo 12mm
AluminiumTo 8mm
Tolerance±0.2mm

Typical parts

  • Brackets and plates
  • Panel cut-outs
  • Sprockets and profiles
  • Wear strips
  • Batch production parts

How we cut

We nest to minimise waste, sequence fine features before heavy profiles, and set focus and speed for the material. First-off parts are measured before the run continues.

Checked before folding

Cut edges are checked square and free of dross before any folding or welding. Correcting a profile at the bench is faster and cheaper than correcting it on site.

Common question

How thick can you cut?

Mild steel to 20mm, stainless to 12mm and aluminium to 8mm. Beyond that we work with partner processes or redesign the part as a welded assembly.

Set-up and changeover

Changeover between materials is fast: gas settings, focus and feed rate are held in the program, so a stainless run follows a mild steel run without trial cuts. First-off inspection confirms the set-up before the batch proceeds.

Works alongside

One more thing

Why is a laser-cut edge sometimes discoloured?

A light oxide tint is normal on cut edges, especially on stainless. It is cosmetic and is removed by linishing where the finish specification requires a bright edge.

Ready to start a job?

Send a drawing and we will come back with pricing and a lead time.

Request a Quote