Sheet Metal
& Steel Fabrication

Legal

Terms of Use

Home/Terms of Use

Last updated 17 November 2026Version 2.0Applies to junfabrication.com.au

The basis on which we quote, fabricate, deliver and install work — and the terms that apply to using this website. Written to be read, not to be hidden.

01Acceptance

These terms govern your use of the JUN Fabrication website and the general basis on which we quote and supply work. By using this website you accept these terms. If you do not agree, please do not use the site.

Where a written quotation or contract contains different terms, those terms will apply to that job. Nothing on this website is a promise to supply work at a particular price or by a particular date until it is confirmed in a written quotation.

02Website content

Information on this site is provided as a general guide to our services and capabilities. Dimensions, capacities, finishes and lead times are indicative and may change without notice.

Images shown on this site are representative of our work and processes. Actual material, finish and appearance may vary between jobs, and photographs may show work completed for other customers.

We take care to keep the site accurate, but we do not warrant that it is complete, current or free of error. You should confirm any detail that matters to your project with us before relying on it.

03Intellectual property

All text, images, photographs, drawings, logos and layouts on this site are owned by or licensed to JUN Fabrication Pty Ltd. You may view and print pages for your own business use. You may not copy, reproduce, republish, scrape or reuse our images or project descriptions in your own marketing without written permission.

Drawings, sketches, samples and specifications you send us remain your property. You confirm that you have the right to supply them and that our use of them to quote and complete your work does not infringe anyone else’s rights.

Where we prepare drawings for you, ownership and licence terms are stated on the quotation. Unless agreed otherwise in writing, we retain the right to reuse our own standard details, jigs and fabrication methods.

04Quotations

  • Quotations are based on the drawings, specifications and quantities provided at the time of enquiry.
  • Quotations are fixed prices, valid for 30 days unless stated otherwise.
  • A quotation states the material grade and thickness, the finish, the quantity, the lead time and any exclusions.
  • Delivery, installation and site work are included only where the quotation says so.
  • Changes to drawings, material, quantity or finish may require a revised price and lead time.
  • Drawings supplied by the customer remain the customer’s responsibility, including dimensional accuracy and fitness for purpose.

We aim to respond to a complete enquiry within one business day. A quotation is an offer, not a reservation of workshop capacity — capacity is confirmed when the order is accepted.

05Orders and acceptance

An order is formed when we receive your written acceptance of a quotation — email is sufficient — together with any deposit or drawing approval the quotation requires. Work is scheduled once the order is accepted.

We may decline an order, for example if the work falls outside our capability, the specified material is unavailable, or the drawing cannot be fabricated safely. If we decline after receiving a deposit, we refund it in full.

Please check the quotation against your drawing before accepting it. Once accepted, the quotation is the reference document for the job.

06Payment and title

Payment terms are set out on the quotation or invoice. Unless otherwise agreed in writing, invoices are payable within the stated term.

We may hold finished work, or delay delivery or installation, until outstanding amounts are settled. Where the invoice states it and the law permits it, overdue amounts may attract interest and reasonable recovery costs.

Title in the goods remains with JUN Fabrication Pty Ltd until payment is received in full. Risk passes as described in the delivery section below, so you should insure the goods from the point of delivery or collection.

07Drawings, materials and tolerances

We check every drawing before cutting. If something is missing, ambiguous or impractical we will ask before proceeding — our drawing checklist sets out the six things we look for.

Our standard tolerances are ±0.2mm on laser-cut profiles and ±0.5° on programmed bends. Tighter tolerances are possible on request, but they must be stated on the drawing and accepted in writing, and they may affect price and lead time.

Material is supplied to the grade and thickness stated on the quotation — typically 304 or 316 stainless steel, mild steel, galvanised steel or aluminium. Substitutions are made only with your written approval.

Natural variation in mill finish, weld appearance, powder-coat colour between batches and galvanising texture is normal and is not a defect. Tell us the service conditions — indoor, coastal, food contact, load-bearing — so the grade and finish can be specified correctly.

08Lead times and delivery

Lead times are given in good faith and are calculated from approval of drawings, not from the date of enquiry. Most one-off parts are ready within three to five working days of approval. Batch runs and structural work are scheduled and confirmed at quotation stage.

Delays caused by material availability, transport, weather or events outside our control do not entitle the customer to cancel an order. We will tell you the revised date as soon as we know it.

We deliver across New South Wales, and pickup is available by arrangement from 8/8 Priddle Street, Warwick Farm NSW 2170 during workshop hours. Delivery charges, if any, are shown on the quotation.

Risk in goods passes to the customer on delivery or collection. Please inspect goods on receipt and note any visible damage with the carrier before signing.

09Installation

Where installation is included, access, site conditions and fixing details must be confirmed before fabrication. Additional work required due to site conditions not disclosed at quotation stage may be charged separately.

The customer is responsible for obtaining any approvals, permits, engineering certifications or strata consents required for installation, and for confirming that the substrate and fixing points are suitable.

Please tell us about site inductions, access restrictions, working hours or safety requirements before the installation date so the crew can plan around them.

10Variations and cancellation

Changes requested after drawing approval are treated as a variation. A variation may change the price and the lead time, and we will confirm it in writing before carrying out the work.

Because our work is custom-made, an order cannot be cancelled once material has been cut or production has started, except where the law requires otherwise. If you cancel before production starts, we may charge for work already completed, material purchased for the job and any other non-recoverable costs.

11Defects and returns

We stand behind our workmanship. If an item does not match the approved drawing, or is defective due to our fabrication, please notify us within 14 days of delivery so we can assess and remedy it.

Remedies may include repair, replacement or a refund, at our option where the law permits. To help us assess a claim quickly, please include the invoice or job number, photographs and a description of the issue.

This does not cover damage caused by transport, incorrect installation, misuse, normal wear, or changes made by others. It also does not cover corrosion or finish failure caused by service conditions that were not disclosed at quotation stage.

Custom-made items cannot be returned for change of mind. Nothing in this section excludes rights that cannot be excluded under the Australian Consumer Law.

12Warranty

We warrant that work will be fabricated with reasonable care and skill, in accordance with the approved drawing and the material and finish stated on the quotation.

Any warranty period and its conditions are stated on the quotation or invoice. This warranty is in addition to, and does not limit, your rights under the Australian Consumer Law.

The warranty does not cover damage from misuse, unapproved modification, improper maintenance, or exposure to conditions outside the specified material and finish. Where a finish is applied by an approved partner, the partner’s warranty terms are passed through to you.

13Liability

To the extent permitted by law, our liability for any claim arising from the supply of goods or services is limited to the value of the work supplied. We are not liable for indirect or consequential loss, including loss of profit, delay costs, loss of use, or damage to property caused by others.

Nothing in these terms excludes rights that cannot be excluded under the Australian Consumer Law. Where that law applies and we are permitted to limit our remedies, our liability is limited to re-supplying the goods or services, or paying the cost of re-supply.

14Customer responsibilities

You are responsible for the accuracy and completeness of the drawings, dimensions, site measurements and specifications you supply, and for confirming that the design is fit for its intended purpose and complies with applicable standards, codes and approvals.

Where a claim arises from information you supplied, from your design, or from installation or modification carried out by others, you indemnify us to the extent permitted by law. This indemnity does not apply to the extent the claim is caused by our own negligence or defective workmanship.

15Events outside our control

Neither party is liable for a failure or delay caused by events beyond its reasonable control, including natural disaster, fire, flood, pandemic, war, industrial action, utility failure, supplier or transport failure, or government direction.

The affected party will notify the other promptly and resume performance as soon as the event ends. If the event continues for more than 60 days, either party may cancel the affected work by written notice, and we will refund amounts paid for work not performed.

16Privacy and website use

Personal information is handled in accordance with our Privacy Policy, and website cookies and local storage are described in our Cookie Policy.

You may not use this website to send unlawful, offensive or misleading material, attempt to gain unauthorised access to our systems, introduce malicious code, or interfere with the operation of the site.

17Governing law and general

These terms are governed by the laws of New South Wales, Australia. Any dispute will be subject to the jurisdiction of the courts of New South Wales.

We may update these terms from time to time. The current version is always published on this page, with the date of the last update shown at the top, and continued use of the site after an update constitutes acceptance.

If any provision is held unenforceable, it is severed to the minimum extent necessary and the remainder continues in force. These terms, together with the quotation and any written variation, form the entire agreement for the job and supersede prior discussions. A failure to enforce a right is not a waiver of it.

18Contact

For anything about these terms, a quotation or an order, contact the workshop:

JUN Fabrication Pty Ltd 8/8 Priddle Street, Warwick Farm NSW 2170, Australia
Phone: 02 8607 8125
Email: contact@junfabrication.com.au
Workshop hours: Monday – Friday, 7:00am – 4:30pm