Polishing and linishing give stainless steel its finish — brushed, satin or mirror. It also blends welds and removes scratches.
A consistent grain depends on direction, pressure and sequence. We finish in one direction, blend welds before polishing, and check the result under light from more than one angle.
What the finish covers
- Brushed finish — a consistent linear grain
- Satin finish — a softer, uniform sheen
- Mirror finish — for feature and architectural work
- Weld blending — joints finished flush with the surface
- Scratch removal — transport and handling marks removed
Specifications
| Finishes | Brushed · satin · mirror |
| Material | Stainless steel primarily |
| Grain | Direction controlled to specification |
| Check | Inspected under light from multiple angles |
Typical jobs
- Handrails and balustrades
- Benches and tables
- Architectural panels
- Feature gates
- Food-grade surfaces
How we get the grain right
We finish in the direction the job specifies and blend welds before the final pass, so the joint matches the grain. Deep scratches are removed progressively — coarse to fine — so the surface ends level.
Inspected under light
Finished surfaces are checked under light from more than one angle. If the grain direction is uneven or a weld shadow remains, the part goes back to the bench.
Common question
Brushed or mirror — which is harder to maintain?
Brushed hides fingerprints and small marks; mirror shows them. For touch points and outdoor work, brushed is usually the practical choice.
What to specify
- The finish — brushed, satin or mirror
- Grain direction, if it matters to the design
- Whether welds must be blended invisible
- The part’s exposure — indoor or outdoor
Related work
Also asked
Will polishing remove my welds’ strength?
No. Dressing removes the weld cap, not the throat. Weld size is specified for strength; polishing refines the surface. For structural welds we agree the finish before touching them.
Ready to start a job?
Send a drawing and we will come back with pricing and a lead time.