Sheet Metal
& Steel Fabrication

Capabilities

CNC Turret Punch

Home/Capabilities

The turret punch drives shaped tools through sheet metal to produce holes, louvres, embosses and forms in rapid succession. For hole-intensive work it is often faster and more economical than cutting every feature with a laser.

The press does more than punch. It forms louvres, knock-outs, countersinks and small flanges in the same set-up, and it can tap M3 to M10 — reducing the number of times a part is handled and the cost that goes with each handling.

What the punch covers

  • Hole patterns — grilles and ventilation panels
  • Louvres and forms — without secondary operations
  • Countersinking — flush fasteners
  • Tapping — M3 to M10 in the same set-up
  • Notching — corner and edge cut-outs

Specifications

Sheet sizeUp to 2500 × 1250mm
MaterialMild steel · stainless · aluminium to 6mm
ToolingStandard turret plus custom forms
TappingM3 – M10
Tolerance±0.2mm on hole positions

Typical parts

  • Ventilation grilles
  • Perforated guards
  • Brackets with tapped holes
  • Louved panels
  • Batch hole patterns

How we punch

We match the tool to the material and set the correct punch-to-die clearance, then stage the program so forms do not distort adjacent holes. Tapping in the same set-up removes a second handling.

Gauged on first-off

Hole positions and tapped threads are gauged. A punched hole is a finished feature.

Common question

Laser or turret punch?

For mixed geometry with holes, the laser is usually best. For many identical holes, louvres or tapped holes, the punch is faster and cheaper. Tell us the part and we will choose.

Set-up and changeover

Tooling is staged in the turret before the sheet loads, and the program runs the forms in an order that protects adjacent features. Hole sizes are checked with a gauge on the first-off and at intervals through the run.

Works alongside

One more thing

Can you punch stainless steel?

Yes, to 6mm. Stainless work-hardens, so tool clearance and punching speed are set accordingly — which is why stainless punching is quoted on the actual grade, not on a generic “sheet metal” rate.

Ready to start a job?

Send a drawing and we will come back with pricing and a lead time.

Request a Quote