The fastest way to add days to a lead time is to send a drawing that is almost ready. The six things we check on every drawing, and the mistakes that most often send a job back for clarification.
First, material and thickness. “Steel” is not a specification; “3mm mild steel, galvanised” is. Grade and thickness decide bend allowance, weld procedure and finish, so a drawing without them cannot be quoted accurately.
Second, dimensions that add up. We check that the flat pattern matches the folded size, that holes clear the bend lines, and that inside and outside dimensions are not mixed. A hole placed too close to a bend is the single most common reason a part has to be redesigned.

Third, tolerances in the right places. As covered in our tolerance note, tight tolerances belong on the holes and mounting faces, not the outer profile. A drawing that specifies ±0.1mm everywhere will cost more and deliver nothing for it.
Fourth, finish and edge condition. Painted, polished, powder coated or raw — each changes the process and the price. If edges are visible, say whether they are to be deburred, linished or left as cut.
Fifth, quantities and marking. Quantities drive nesting and set-up. If parts need part numbers or fold lines marked, say so — the laser can engrave them during cutting for almost no extra cost.
Sixth, what it mates with. A bracket that welds to a frame is different from one that bolts to a machined face. Tell us what the part fits and we will flag anything on the drawing that will not work in practice.
What it means for your next order
- Send material, thickness and finish with the drawing — they change the price more than the geometry.
- Check hole-to-bend distances; that is the most common reason a part is redesigned.
- Put tolerances on the interfaces, and mark part numbers on the drawing if you want them engraved.
Questions we ask before quoting
- What does the part mate with?
- Are the dimensions finished or flat?
- Are edges visible, and how should they be finished?
Ready to start a job?
Send a drawing and we will come back with pricing and a lead time.