Sheet Metal
& Steel Fabrication

Insights

Tolerances That Actually Matter

Home/Drawing standards

Insight · Tolerances · Read time: 4 min

Not every dimension needs ±0.2mm. Tight tolerances cost money in set-up, inspection and remakes, and only a few dimensions on a part justify that cost. The dimensions that matter are the interfaces: holes that receive bolts, faces that mount to another part, and edges that locate in a jig.

We cut laser profiles to ±0.2mm and fold to ±0.5° as standard; these are the figures the machines hold in normal production. Where customers get into trouble is specifying ±0.1mm on every dimension when only the mounting holes mate with anything.

Tight tolerances belong on the interfaces, not on the outer profile. The holes that receive bolts, the faces that mount to another part, the edges that locate in a jig — those matter. The outside profile of a bracket rarely does, and paying for precision there adds cost without adding function.

Vernier check on a machined hole position
Vernier check on a machined hole position

The same logic applies to folds. A bracket that welds onto a frame can accept a degree of variation; a bracket whose folded ears must line up with two pre-drilled holes cannot. Tell us what mates with what, and we will tell you where the tolerance has to be held.

Tight tolerance is not free, but it is also not expensive when it is specified in the right place. A drawing that says ±0.5mm everywhere and ±0.1mm on the two holes that matter is cheaper to make than one that says ±0.1mm everywhere.

What it means for your next order

  • Put tight tolerances on the holes and mounting faces, not the outer profile.
  • A drawing that says ±0.5mm everywhere and ±0.1mm on two holes is cheaper than ±0.1mm everywhere.
  • Tell us what mates with what; we will flag dimensions that are impractical to hold.

Questions we ask before quoting

  • Which features locate the part?
  • What does it bolt to or fit into?
  • Is the tolerance functional or just cautious?

Ready to start a job?

Send a drawing and we will come back with pricing and a lead time.

Request a Quote
All insights