Sheet Metal
& Steel Fabrication

Projects

Batch Press Brackets

Home/1,200 folded brackets

Industry: Machinery manufacturing · Scope: 1,200 laser-cut and folded brackets · Location: NSW

A machinery builder needed 1,200 mounting brackets for a new product line — identical enough that the assembly jig never moved, and delivered in staged batches to match the build schedule.

First-off bracket sample for approval
First-off bracket sample for approval

The challenge

The bracket had two folds and three holes, and the holes had to land within ±0.2mm after folding. In the first sample run, the fold allowance from the customer’s flat pattern pulled the holes slightly off position — enough to jam the assembly jig.

The solution

We recalculated the bend allowance for the actual material thickness, moved the hole pattern on the flat, and cut a corrected first-off. The customer approved the sample, and we locked the program for the balance. Batches were staged to the build schedule and delivered labelled by drawing number.

Batch of folded brackets ready for delivery
Batch of folded brackets ready for delivery

The result

All 1,200 brackets assembled without rework. The corrected flat pattern became the customer’s master drawing for future runs, and the per-part cost dropped as the set-up was spread across the full quantity.

Quantity1,200
Tolerance±0.2mm held
ReworkZero parts
Batches6 staged releases

Key decisions that made it work

  • Corrected the flat pattern: the bend allowance was recalculated for the actual material, and the holes were moved before cutting.
  • Locked the program after approval: the corrected first-off became the master for all 1,200 parts.
  • Staged the batches: the customer received stock against the build schedule instead of one large delivery.

Planning a similar job?

  • Send the finished dimensions, not just a flat pattern — the allowance is our responsibility.
  • Approve the first-off physically; it becomes the reference for the run.
  • Ask for staged supply if you do not want to store the whole quantity.

Ready to start a job?

Send a drawing and we will come back with pricing and a lead time.

Request a Quote
All projects